سال انتشار: ۱۳۸۶

محل انتشار: ششمین کنفرانس ملی مهندسی نساجی ایران

تعداد صفحات: ۱۰

نویسنده(ها):

Seyed Mansour Bidoki – Department of Textile Engineering, Yazd University, Yazd, Iran
D.M Lewis – Colour and Polymer Chemistry Department, Leeds University, Leeds, U.K
M. Clark – Colour and Polymer Chemistry Department, Leeds University, Leeds, U.K

چکیده:

The electronics that facilitate our daily pursuits and interactions may soon be integrated into textiles in all areas of our personal environment. To develop more appealing wearable electronics, conductive materials are being used to transform traditional textile and apparel products into lightweight, wireless, wearable computing devices. Nanosized metallic particles dispersed in a polymeric matrix have been used conventionally as a paste or ink to print electrically active patterns on different substrates. The potential of ink-jet printing in this field is clearly important but the challenge to date has been how to achieve prints of low volume resistivity from the very low viscosity ink required for ink-jet printing. In this study, ink-jet printing techniques were used to directly deposit metallic conductive patterns to produce wiring boards, antennas, electrodes and so forth. In these methods, aqueous solutions of metal salt and reducing agent were ink-jet printed consecutively onto the substrate, where an immediate chemical reduction transformed the metal cations into very fine metallic particles. The best performing reducing agent for ink-jet metal deposition was found to be ascorbic acid at neutral pH. Using this chemistry, nanosized silver patterns, composed of particles in the size range 10–۲۰۰ nm, were successfully formed using a standard office ink-jet thermal-head printer. Deposited layers of silver with high electrical conductance up to 1.89 × ۱۰۵ S m−۱ and sheet resistance up to 0.5/were printed whilst higher conductivities might be expected using more appropriate devices.