سال انتشار: ۱۳۹۱

محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران

تعداد صفحات: ۱۱

نویسنده(ها):

m Behnood – Department of Chemical-Reservoir Engineering, Amirkabir University of Technology
m Vahedi Pour –
m Dadvar –

چکیده:

The main objective of this paper is to present a practical interpretation of the pressure behavior of two phase oil and water naturally fractured reservoirs. Well test estimates the reservoir parameters bystudying flow regimes which are observed during production. From starting of production first radialflow regime, transient period and secondary radial flow regime will be observed. But by existing of well-Bore-Storage effect during production, the first radial flow regime will be disappeared, soconventional and type curve methods which are based on using all flow regimes are useless. Synthesis Direct method is a new technique that solves the problem by developing simple equations. This technique couples the characteristic points and lines from log-log plot of pressure and pressurederivative data resulting in simple equations to solve for the desired reservoir parameters. In thistechnique there is no need to observing all flow regimes. On the other part the matrix-to-fracture interporosity parameter (l ), and fracture storativity (w ), aresubject to changes during the life of an oil field. This depends entirely on the nature of saturationcondition both in fractures and matrix blocks. Failure to consider two phase flow parameters will result in inaccurate estimation of reservoir parameters. Because of the high amount of this type ofbehavior in many reservoirs worldwide, developing appropriate method is very important. In this paper the effect of wellbore storage is analyzed on log log pressure and pressure derivative curve vs. time for a single well in the two phase oil and water naturally fractured reservoirs with unsteady stateflow regime. Application of direct synthesis technique is presented for this case and several correlations is offered for calculation of reservoir parameters. Finally the capability of technique and the accuracy of the equations is studied through simulated test example