سال انتشار: ۱۳۸۹

محل انتشار: دومین کنفرانس بین المللی الکترونیک قدرت و سیستم های درایو

تعداد صفحات: ۶

نویسنده(ها):

taheri – Electrical Engineering Dept. Amirkabir University of Technology Tehran, Iran
Milimonfared – Electrical Engineering Dept. Amirkabir University of Technology Tehran, Iran
Bayat – Electrical Engineering Dept. Amirkabir University of Technology Tehran, Iran
Riazmontazer – Electrical Engineering Dept. Amirkabir University of Technology Tehran, Iran

چکیده:

This paper presents an interleaved active-clamping zero-voltage-switching (ZVS) forward-flyback converter without output choke. The presented topology has two activeclamping circuits with two separated transformers. In this converter the main switch of any converter also acts as auxiliary switch for the other one, so only two switches are required and there is no need to additional switches to achieve ZVS operation. Because of interleaved operation of the converter, the output current ripple will be reduced. The proposed converter can approximately share the total load current between two secondaries. Therefore, the transformer copper loss and the rectifier diodes conduction loss can be decreased. The output capacitor is made of two series capacitors which reduce the peak reverse voltage rectifier diodes. The circuit has no output inductor and has a few semiconductor elements such that the adopted circuit has a simpler structure, lower cost and suitable for high power density applications. Detailed analysis and design of this new converter are described. Then simulation results with an ac input voltage of 85-135Vrms, an output voltage 12V and output current 20A verified the validity of the proposed converter.